git仓库,国内git

文章 2年前 (2021) admin
0
git仓库,国内git

Q1:阿里云服务器 怎么用git部署代码

使用阿里云Ubuntu 12.0.4 64位操作系统做饭桶服务器。首先饭桶服务器有两种访问方式可以选择:http方式和嘘的方式,http方式更容易使用1、http方式的饭桶服务器搭建以及使用饭桶命令行访问:在服务器上1)安装人的本质服务器,这显然是我们饭桶服务器的基础2)现在我们需要安装几个包,这些包是“git-core”和“apache2”,我们这样做就像所以:-apt-get updateapt-get Install Apache 2 git-core 3)现在我们需要为您的新存储库创建一个新文件夹,并设置一些初始权限,我们像so :-CD/var/wwwmkdir test-repo。Git光盘测试报告。Git Git-bare initgit update-server-info chown-R www-data。www-data。4)我们现在需要在Apache2上启用WebDAV,我们将使用其中的一个来为存储库提供服务:-a2enmod dav_fs5)我们现在需要通过创建以下文件来配置对我们的存储库的访问限制:-/etc/apache2/conf.d/git.6)接下来,我们需要创建一个用户帐户,您需要使用该帐户来浏览并提交到存储库.然后,系统会提示您输入用户的密码并确认!7)好了,这就是服务器端的配置…我们只需要像这样重启Apache2,然后我们应该准备好继续客户端的工作了!/etc/init.d/apache2重启…您现在可以进入客户端了!在客户端侧好的所以现在我们需要创建一个本地(在你的桌面机器上)存储库,然后我们将启动新的远程存储库…所以,如果你使用Linux/MacOSX调出终端并键入以下命令:-mkdir ~/Desktop/test-project CD ~/Desktop/test-project git initgit远程添加origin http://@/test-project。git触摸READMEgit add .饭桶提交上午初始导入“饭桶推送原点万事达!您的名为" README "的初始文件目前是空白的,现在已经提交,并且您已经将代码推送到新的饭桶服务器,该服务器现在已经完成了饭桶存储库创建过程,现在将来您可以像so:-git clone @/test-project一样"克隆"您的存储库。注意上面连接http://@/test-project.git中的用户就是你htpasswd-c/etc/Apache 2/passwd。饭桶输入的用户名。另外新建仓库的时候,只需执行:cd /var/wwwmkdir项目名激光唱片项目名git-bare initgit update-server-info chown-R www-data。www-data .然后在/etc/apache2/conf.d/git.conf中对应添加上面类似段即可。其中:AuthUserFile密码文件名后面的文件就是你指定的密码文件,你可以htpasswd -c密码文件名对应指定该项目的用户名和密码即可。添加用户是不要-c参数:htpasswd密码文件名

Q2:怎么在阿里云上搭建git服务器

小鸟云服务器niaoyun实例创建好之后,您可以使用以下任意一种方式登录服务器:远程桌面连接(MicrosoftTerminalServicesClient,MSTSC):采用这种方式登录,请确保实例能访问公网。如果在创建实例时没有购买带宽,则不能使用远程桌面连接。管理终端VNC:无论您在创建实例时是否购买了带宽,只要您本地有网页浏览器,都可以通过管理控制台的管理终端登录实例。使用远程桌面连接(MSTSC)登录实例打开开始菜单>远程桌面连接,或在开始菜单>搜索中输入mstsc。也可以使用快捷键Win+R来启动运行窗口,输入mstsc后回车启动远程桌面连接。在远程桌面连接对话框中,输入实例的公网IP地址。单击显示选项。输入用户名,如小鸟云默认为niaoyun。单击允许我保存凭据,然后单击连接。这样以后登录就不需要手动输入密码了。

Q3:如何在阿里云linux服务器安装git

Gentoo:涌现饭桶
Centos: yum安装饭桶
Ubuntu: apt-get安装饭桶
Debian: apt-get安装饭桶
其它:下载源代码包,然后编译安装,或者用其它的包管理制。

Q4:云服务器使用git更新部分代码,需要用到远程仓库吗?

在服务器上创建一个git仓库,git init,本地克隆远程git仓库,在本地git克隆本地仓库中编写代码,并添加提交给本地仓库git addGit提交被推送到远程代码仓库。

Q5:求助关于在阿里云上执行git clone的问题

使用方法就是git clone 然后加你的地址就好了呀,如果你拉取国外源码的时候特别慢那么你也不用惊讶,因为阿里云使用的是电信出口,电信出口那情况肯定是众所周知的慢。。。

Q6:怎么用git把阿里云的数据备份下来

使用阿里云Ubuntu 12.0.4 64位操作系统做git服务器。
首先git服务器有两种访问方式可以选择:http方式和ssh的方式,http方式更容易使用。
1、http方式的git服务器搭建以及使用git命令行访问:
On the Server
1) Install Ubuntu Server, this is the base of our git server obviously
2) Now we need to install a couple of packages, these being ‘git-core’ and ‘apache2′, we do this like so:-
apt-get update
apt-get install apache2 git-core
3) Now we need to create a new folder for your new repository and set some inital permissons, we do this like so:-
cd /var/www
mkdir test-repo.git
cd test-repo.git
git --bare init
git update-server-info
chown -R www-data.www-data .
4) We now need to enable WebDAV on Apache2 of which we will use to serve the repository:-
a2enmod dav_fs
5) We now need to configure the access restrictions to our repository by creating the following file:-
/etc/apache2/conf.d/git.conf
Then fill it in with the following content:-

DAV on
AuthType Basic
AuthName "Git"
AuthUserFile /etc/apache2/passwd.git
Require valid-user

Then save and close the file, lets move on to the next bit..
6) Next we need to create a user account of which you will need to use to browse of commit to the repository..
htpasswd -c /etc/apache2/passwd.git
You could then be prompted to enter the password for the user too and confirm it!
7) Ok that’s it for the server side configuration… we just need to restart Apache2 like so and then we should be ready to move on to the client side stuff!
/etc/init.d/apache2 restart
…you can now move on to the client side stuff!
On the client side
Ok so now we need to create a local (on your desktop machine) repository and then we’ll initiate the new remote repository… So, if your using Linux/MacOSX bring up the terminal and type the following commands:-
mkdir ~/Desktop/test-project
cd ~/Desktop/test-project
git init
git remote add origin @/test-project.git
touch README
git add .
git commit -a -m “Initial import”
git push origin master
Done! – Your intiial file named ‘README’ which currently is just blank has now been committed and you’ve pushed your code to your new git server which has now completed the Git reposity creation process, now in future you can ‘clone’ your resposity like so:-
git clone @/test-project.git

注意上面连接@/test-project.git中的user就是你htpasswd -c /etc/apache2/passwd.git 输入的用户名。
另外新建仓库的时候,只需执行:
cd /var/www
mkdir 项目名
cd 项目名
git --bare init
git update-server-info
chown -R www-data.www-data .
然后在/etc/apache2/conf.d/git.conf中对应添加上面类似段即可。
其中:
AuthUserFile 密码文件名
后面的文件就是你指定的密码文件,你可以
htpasswd -c 密码文件名
对应指定该项目的用户名和密码即可。添加用户是不要-c参数:
htpasswd 密码文件名

版权声明:admin 发表于 2021年10月27日 上午11:09。
转载请注明:git仓库,国内git | 热豆腐网址之家

相关文章